The superlative feel and comfort of the Sensor 3.
And Formula One responsiveness from its titanium trussed, carbon fiber bar.
Every part of the bar is meticulously designed to provide unprecedented feedback and control. And now, with 100% Tectanium lines, the Sensor 3 Pro delivers the ultimate fly-by-wire feel.
LIVE WIRE NEW!
Feel more "connected" to your kite with floaters that don't interfere with the natural movement of the steering lines as they end a few centimeters above the bar. Adjust bar width by merely swiveling the line block hidden under the Stealth Winders. And the elastic line keepers disappear into the floaters for a clean, uncluttered kite session.
Twisted lines are a thing of the past.
Untwisting your front lines after looping your kite is as simple as pulling in the bar. Front line twists only occur below the Sensor 3 bar where a ceramic swivel unravels the front lines automatically. Another benefit is the sweet "between the fingers" comfort when your hand straddles the center lines due to the narrow width and coating of the front lines. Welcome to the era of auto untwist!
A kite bar's safety system is the critical link between you and your kite. It needs to work flawlessly and intuitively. The Sensor 3's new QR (quick release) meets or exceeds all safety requirements and, most importantly, is easier than ever to reconnect.
SUPPORTED SINGLE FRONTLINE SAFETY (SSF)
CORE's exclusive hybrid system combines the advantages of a single front line, double front line, and fifth line safety. When deployed, it blows out the front line (below the "Y"), eliminating pull. At the same time, a pulley system shortens the second front line (above the "Y"), which moves the kite to a stable and safe relaunch position.
SHORT SAFETY LEASH
Extra short is extra safe.
A short safety leash comes standard with all CORE bar systems. When connected to your spreader bar, our 50cm leash delivers better ergonomics and safety. It's easier to see or grab, and it won't tangle. If, on the other hand, you see yourself unhooking in the future, we have a Pro Leash for you.
THE CORE ADVANTAGE
LINES MADE IN GERMANY
Our line supplier, Liros, is a name synonymous with innovation and workmanship. Liros pre-stretch all our lines under heat for lasting performance. You'll immediately notice the quality when laying out your lines for the first time.
For a better hold.
We splice all our ends before sewing for a more permanent hold. It's a little more work, but this method guarantees higher strength and better aerodynamics.
REPLACEABLE BAR INSERTS
Simple and replaceable.
Bar inserts that surround the depower lines lubricate them as they pass through the bar to reduce wear. The inserts are also easily and inexpensively replaced without tools.
More grip's always better.
Special rubber is applied to the bar ends and
CIC release to give the surface even more grip when wet.
CORE LOOPS & STICK SETS
The small loop comes standard on the Sensor 3 Pro and is designed for freeriders and freestylers who mostly ride hooked. The smaller loop size also lowers the adjuster height, which benefits shorter riders. An elasticized chicken stick is easily manipulated to make hooking in faster. After hooking in, the chicken stick can be passed through the harness hook to avoid unintentional unhooking.
The standard loop Sensor 3 is delivered with a triple ring. A combo ring is included for wakestyle use only. All images on this page show the combo ring.
The Rope Slider loop is our recommended solution for wave and foil riders (who use a rope harness). Its compact design brings the bar closer to the body and improves lateral movement without annoying harness slippage. The Rope Slider is only intended for use with a sliding rope spreader bar. The metal surface of the loop is finely ground by hand to reduce friction and wear on the spreader bar rope. The safety ring can be attached in semi-suicide mode. This method keeps the leash's carabiner at the same level of the quick release and out of the way.
Radical wakestylers, freestylers, and unhooked kiters will prefer our largest available chickenloop. Its size makes unhooking and hooking back in easy and intuitive. Naturally, the distance to the adjuster increases, so you should keep that in mind. To prevent unintentional unhooking, use the chicken stick and when you don't need it, simply move it outside the loop where it won't get in the way.
The Sensor 3 Wake is set up with the combo ring. Unhook and hook back in like never before.
PRO LEASH 3
Radical kiter or wakestyler? The Pro Leash 3 is for you. Its length enables comfortable passes without the "straitjacket" feel. A new swivel guarantees smooth spinning and a generous, protective neoprene sleeve over the carabiner prevents unintentional release.
Please note that connecting your leash to the back of your harness makes it more difficult to release than our standard leash. Do not select this option if you ride hooked in.