HIGH PERFORMANCE FREERIDE/BIG AIR.
7m / 9m / 10m / 12m / 15m
- Big Air
- Boosting, from zero to hero
- High aspect, no respect
- Go big or go home
3 YEARS WARRANTY
SINCE 2019 KITES AND BOARDS
MADE IN EUROPE
Delta Bow Shape
This shape is a mixture of Delta and Bow shapes taking advantages of both. It offers lots of depower and boosting power on demand, automatic relaunch and maximum airtime. The Delta Bow shape is easy to control with low to medium bar pressure. This shape is ideal for riders looking for powered freeriding, big air jumps and hooked in freestyle.
5 Strut Design
The five strut design creates a very strong and sturdy frame for the canopy and is much needed for kites with longer wingspan, such as Delta Bow shaped kites. For high performance big air kites, like the Hyper, it is crucial for the kite to keep its shape and this is best achieved with the support of five struts.
With introduction of TerTex material, the Dacron frame has been completely redesigned. Heave duty Dacron leading edge and wintip reinforcements create the backbone of all CrazyFly kites. The heavy duty Dacron frame ensures the best strength to weight ratio and makes the kite much more rigid, correctly shaped, stronger and durable. This results in amazing flight stability, more dynamic reactions to rider input and explosive boosts.
TerTex is a brand new material used on all 2022 CrazyFly kites. It is two times stronger than our Triplex triple ripstop and at the same time TerTex is forty percent lighter than the Dacron material we use. Applied on all struts, wingtips and over the central strut of all 2022 CrazyFly kites, TerTex radically reduces kite weight. Lighter kites have better low end, move faster through the air, are easier to relaunch and turn quicker. TerTex also increases the wind range, as low end performance is increased, because the lighter kite is still able to fly in lighter winds.
Brand new and exclusive to CrazyFly, we introduced Triplex, the most advanced ripstop material on the market. Triplex has by far the best strength to weight ratio and with triple coating its durability is unmatched. The coating protects the fabric from UV rays, salt and abrasive objects, such as sand. Triple coating and three ripstop yarns ensure the lowest possible elongation and deterioration of the material till date.
We are extremely proud to have over 98% of our product packaging from recycled paper. In the last few years we have been working hard on this and have replaced almost all plastic packaging with paper. All kites and boards have zero plastic packaging and come in recyclable boxes.
The Airlock valve brings easy and quick inflation & deflation of the kite. For added convenience the pump hose connects under the valve with a simple half twist motion and stays securely connected during the whole inflation process.
Reinforced Cross LE Seam
Each panel of the leading has a reinforced LE seam with an extra layer of heavy duty dacron. This makes up for four total dacron layers on the seam in horizontal direction. This reinforcement does not cross the vertical seams, as these already have four layers of dacron which save weight and creates even load distribution on all leading edge seams.
Back Line Attach Points
We moved the back lines attach points directly to the leading edge of the kite. The new attach point position puts less pressure on the canopy and creates a much more direct response and faster turning of the kite.
TerTex is two times stronger than our Triplex triple ripstop and forty percent lighter than the Dacron material we use. Used on all struts and wingtips of all 2022 CrazyFly kites, TerTex radically reduces kite weight. Lighter kites have better low end, move faster through the air, are easier to relaunch and turn quicker.
Double Layer Trailing Edge
Double layer of Triplex triple Ripstop on the trailing edge reduces the weight of the kite compared to traditionally used heavyweight materials. At the same time it creates even tension of the trailing edge and reduces flap. A smooth minimalistic solution with weight saving and increased product longevity.
Arptex sits at the top of abrasion resistant polyamide textiles. This high tech fabric made in Italy can handle plenty of abuse without getting damaged. The official number is 100 000 contacts with abrasive surface before the material starts deteriorating. This is why we selected Arptex as the most suitable material to protect CrazyFly kites in the most abused areas and increase the size of the Arptex Shields.
|WIND RANGE (knots):||15-40||12-33||11-28||10-24||9-20|
|WEIGHT:||2.70 kg||3.10 kg||3.30 kg||3.70 kg||4.10 kg|
* weights may vary slightly from kite to kite